Nil Exposure (Cream)
Pure cement paste finish — no aggregate visible. Soft, uniform appearance with a stone-like character. Ideal for minimalist interiors where the floor reads as a calm, monolithic surface.
Concrete Polishing Sydney
Premium mechanically polished concrete floors for Sydney homes, showrooms, retail, hospitality, commercial and industrial spaces. Multi-step diamond grinding and polishing delivers a long-lasting, low-maintenance architectural floor — finished by hand, sealed for life.
- 5-Star Google Rated
- Fully Insured
- Dust-Controlled Grinding
- Satisfaction Guaranteed
- Residential • Commercial • Industrial
About this service
Mechanically polished concrete is a multi-step diamond grinding and polishing process that transforms a raw or existing concrete slab into a refined, hard-wearing architectural floor. Unlike a topical coating, the finish is created from the slab itself — meaning it won't peel, flake or delaminate over time. The surface is densified with lithium silicate, progressively refined through diamond resin tooling, then sealed with a penetrating guard for long-term stain resistance.
At Ausgrind we polish residential floors, retail fit-outs, showrooms, cafés, hospitality venues, offices, warehouses and industrial slabs across Sydney. Every job starts with a free on-site assessment so we can match the finish — cream, salt-and-pepper or full aggregate exposure — and gloss level to your slab, your design intent and how the floor will be used. We then produce a fixed written quote covering every step from preparation to final burnish, so there are no surprises during the build.
Polished concrete is one of the most sustainable flooring choices available: no new materials are added, the slab is the finished surface, and ongoing maintenance is minimal. Done correctly, it will outlast tiles, timber and most coating systems by decades — making it a strong long-term value for owner-occupiers, landlords, builders and commercial fit-outs alike.
Because polished concrete is a mechanical finish rather than a coating, the look you get is unique to your slab. Every pour has its own aggregate distribution, colour and surface character, and the polishing process reveals that natural variation. We work closely with homeowners, architects, designers and builders across Sydney to dial in the exposure and gloss level that suits the room — from soft matte cream finishes in residential living areas through to full-exposure high-gloss showroom floors.
Maintenance is one of the major reasons clients choose polished concrete. A weekly sweep or vacuum, plus a damp mop with a neutral pH cleaner, is all most floors ever need. There's no grout to scrub, no timber to recoat, no carpet to replace. The penetrating guard sealer significantly improves stain and chemical resistance, and can be topped up every several years without disrupting the slab.
Polished concrete also performs exceptionally well underfoot in Sydney's climate. The slab acts as thermal mass — staying cool in summer and warm in winter — and it's fully compatible with hydronic underfloor heating systems. It's non-combustible, termite-proof, hypoallergenic, and contributes to better indoor air quality than carpet, vinyl or many coating systems.
Why choose this service
- Hard-wearing finish that lasts decades
- Cream, salt-and-pepper or full aggregate exposure
- Hygienic — no grout lines, no off-gassing
- Modern look that suits any interior
- Low ongoing maintenance — sweep & damp mop
- Reflects light to brighten interiors
- Compatible with hydronic underfloor heating
- Non-combustible and termite-proof
- Increases property value and design appeal
- Environmentally friendly — no new materials added
Where we use it
- Residential living areas, kitchens and hallways
- Architectural new-builds and renovations
- Retail and showroom floors
- Cafés, restaurants and hospitality venues
- Office fit-outs and reception areas
- Warehouses and light industrial
- Garages, basements and workshops
- Schools, gyms and community spaces
Aggregate exposure levels
Polished concrete can be ground to four distinct exposure levels. Each reveals a different amount of the aggregate in your slab — from pure cement cream through to a full terrazzo-like statement floor.
Salt & Pepper
Light grind that exposes the fine sand and small stones near the surface. The most popular residential finish — visually interesting without dominating the room.
Medium Exposure
Deeper grind revealing a balanced mix of fines and small aggregate. A great fit for cafés, showrooms and gyms where character and durability matter.
Full Aggregate Exposure
Deepest grind — large stones are fully exposed, giving a terrazzo-like statement floor. Stunning in showrooms, hospitality venues and architectural homes.
Choose your sheen
Polished concrete can be finished from a soft matte through to a brilliant high-gloss showroom sheen. Higher gloss reflects more light and looks more premium; lower gloss hides marks and offers better slip resistance.
Matte
Soft, low-reflection finish that hides marks and footprints. Best for residential living areas and high-traffic homes.
Best slip rating
Satin
Subtle sheen with light reflection. A balanced everyday finish for homes, cafés and offices.
High slip resistance
Semi-Gloss
Noticeable shine that lifts a room and reflects natural light. Common in retail, showrooms and modern kitchens.
Moderate slip resistance
High-Gloss
Mirror-like reflection that maximises brightness. The signature showroom finish — striking, premium and easy to clean.
Lower slip resistance when wet
How we deliver
- 01
Initial site inspection
We attend site, measure the area, assess access and discuss the finish you want.
- 02
Surface preparation
Existing coatings, glue, paint and contaminants are removed mechanically.
- 03
Crack & hole repairs
Cracks are stitched with polyurea, voids and pop-outs filled with colour-matched repair products.
- 04
Initial grinding
Aggressive metal-bond diamonds flatten the slab and remove the cream layer.
- 05
Aggregate exposure
Further metal-bond passes expose the chosen level of aggregate — cream, salt-and-pepper or full.
- 06
Densifier application
Lithium silicate densifier is applied to harden the slab and increase abrasion resistance.
- 07
Grouting & refinement
Pinholes are grouted and the surface refined to remove micro-defects.
- 08
Progressive diamond polishing
Resin-bond diamonds in progressively finer grits refine the surface to your target gloss.
- 09
Stain guard sealer
Penetrating guard sealer is applied for stain protection and easier ongoing maintenance.
- 010
Final burnish
High-speed burnishing delivers the final gloss and consistency.
- 011
Final inspection
We walk the floor with you, confirm the finish and hand over maintenance guidance.
At a glance
- Aggregate exposure
- Nil / salt-and-pepper / medium / full
- Gloss levels
- Matte, satin, semi-gloss, high-gloss
- Typical lead time
- 2–4 days residential, programmed for commercial
- Equipment
- HTC & Husqvarna planetary grinders + HEPA extraction
- Sealer
- Penetrating lithium-based stain guard
- Warranty
- Workmanship guarantee
Slab suitability guide
Almost every concrete slab in Sydney can be transformed — but the right approach depends on the slab's history and condition. Here's what we typically see:
- New concrete
- Ideal — wait for the slab to cure (typically 28 days) before polishing.
- Old concrete
- Almost always polishable. Achievable exposure depends on the slab condition.
- Painted concrete
- Paint is fully removed during the grinding stage at no extra cost in most cases.
- Epoxy-coated floors
- Existing epoxy is ground off mechanically before polishing — no chemicals required.
- Glue residue (tile / carpet)
- Tile beds and adhesive are removed during preparation. Standard inclusion.
- Tile removal
- We can lift tiles, remove the bed and polish the slab beneath as a single package.
- Carpet removal
- Carpet and underlay glue are removed during preparation.
- Uneven concrete
- Aggressive grinding flattens minor variations. Major levelling is quoted separately.
- Cracks
- Stitched with polyurea and filled with colour-matched compound prior to polishing.
- Soft concrete
- Densifier hardens the surface significantly — soft slabs are often better suited to grind & seal.
- Water damage
- Assessed case-by-case. Surface damage is often polishable; structural damage may need repair first.
What it costs
Polished concrete pricing in Sydney depends on slab size, condition, level of aggregate exposure and gloss level required. As a guide, residential projects typically start from $90 per m² for a basic salt-and-pepper finish and range up to $160+ per m² for full-exposure high-gloss work. Commercial and industrial projects are quoted per project after a site visit. Final pricing is influenced by square metres, floor condition, number of rooms, corners and stairs, repairs required, aggregate exposure, desired gloss level, site access and concrete hardness. We provide a fixed written quote after our free on-site assessment so there are no surprises.
Final pricing depends on:
- Total square metres
- Floor condition and contaminants
- Number of rooms and obstacles
- Number of corners and edges
- Stairs included in the area
- Crack and surface repairs required
- Aggregate exposure chosen
- Desired gloss level
- Site access and parking
- Concrete hardness
Why customers pick us
- Owner-operated by Nico & Craig — you deal with the tradesmen doing your floor
- HTC & Husqvarna planetary grinders with HEPA dust extraction on every job
- 5-star Google rated across Sydney
- Fully insured for residential, commercial and industrial sites
- Free on-site assessments and transparent fixed pricing
- Reliable communication from quote to handover
- Satisfaction guarantee on every polished floor
Recent projects
Sydney-wide coverage
We service all of Sydney for concrete polishing — including:
Common questions
Residential polished concrete typically starts from around $90 per m² for a basic salt-and-pepper finish and rises with higher aggregate exposure, higher gloss levels, repairs and access difficulty. We provide fixed written quotes after a free on-site assessment.
Ready to transform your concrete?
Whether it's a single garage or a 5,000m² warehouse, Ausgrind delivers reliable communication and a high-quality finish. Speak to Nico & Craig directly.
Request a Free On-Site Assessment
Free, no-obligation quote. We respond within 1 business day.